Medical Face Mask Making Production Machine Medical Face Mask Making Production Machine

Quantity:
Share this:
  • Product Description

Equipment introduction

1.1 equipment overview:

This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically. The whole nose bridge strip is drawn and unrolled. After cutting the length, it is imported into the edge cloth. The two sides are welded by ultrasonic welding

To the sealing, and then through ultrasonic lateral sealing, through the cutting tool cutting molding; Transfer the mask to two masks through an assembly line

Ear belt welding station, through ultrasonic welding final mask shape; After the mask is made, it is transported to the flat belt line through the assembly line for collection.

 

1.2 equipment installation and configuration requirements

(1) equipment size: 6500mm(L)×4500mm(W)×1900mm(H);

(2) appearance color: international standard warm gray 1C (standard color), in the absence of special instructions according to this standard;

(3) equipment weight: ≤5000kg, ground load ≤500KG/m2;

(4) power supply: 220VAC±5 ‰, 50HZ, rated power of about 9KW;

(5) compressed air: 0.5-0.7mpa, with a service flow of about 300L/min;

(6) operating environment: temperature 10-35 ℃, humidity 5-35%HR, no combustible, corrosive gas, no dust

(cleanliness not less than 100,000).

(7) operator: 1 person

 

 

The equipment mainly consists of structure

No.

Machine part name

Qty

Remark

1

Filter cloth/filter cotton/water-absorbing layer unwinding mechanism

3 sets

Max4 sets are randomly matched with 3 sets

2

Nose bridge strip unwinding mechanism

1 set


3

Nose bridge alignment mechanism

1 set

3 to 7 mm wide

4

Nose bridge strip drive, cutting mechanism

1 set

3 to 7 mm wide

5

Fabric hem folding mechanism

1 set


6

Roll welding edge sealing mechanism

1 set

bilateral

7

Cloth drive mechanism

2 sets


8

Fabric fan folding mechanism

2 sets


9

Roll welding side seam mechanism

1 set


10

Roll sealing mechanism

1 set


11

Transfer line

3 sets


12

Shunt institutions

2 sets


13

Ear belt welding machine

2 sets


14

Blanking line

2 sets


15

The operating system

1 set


16

Operation panel

1 set


 

 

Equipment can adapt to the incoming material and product case:

Name

Hanging scroll number

Width(mm)

Outside diameter of roll (mm)

Inner diameter of barrel (mm)

Weight

Cloth

3

170~200

Φ600

Φ76.2

Max 15kg

Article the bridge of the nose

1

3~7

Φ400

Φ76.2

Max 25kg

Ear with

4

3

×

Product Inquiry